"ACS PV10000 SP chamber allows Certisolis to perform Temperature and RH tests on photovoltaic panels in the most extreme environmental conditions”

One of our biggest Dynamometer Drive-in Test Chamber installed in Beijing and accepted in 2024.

Leadec's Battery Repair Center (BRZ) uses our THERMOSTATIC WALK-IN CHAMBER WZT16 A1 MEDIUM for diagnostics to prepare high-voltage batteries for repair and for quality assurance.

ACS Thermal Vacuum Chamber HVT240K -170130 GN2 will contribute to the Space Smart Factory project by Thales Alenia Space, to be built at Tecnopolo Tiburtino in Rome.

The institute uses our walk-in chamber WZH 16 SP for climatic tests to evaluate efficiency losses simulating heat generator operations within a virtual building environment.

From the production of aircraft parts and modules to the recent development in the aerospace field, with the design and manufacture of subsystems for satellites and other subsystems for Space industry, constituting 80% approx of Frentech turnover.

The development of new "smart" materials, with adaptive performances aimed at increasing the energy efficiency of the built environment is one of the main research lines of EAPLAB, the Technical Physics laboratory of the Engineering Department of the University of Perugia.

The DY110 C chamber allows to test the Surface Treatment, its characteristics and its behaviour during use, to verify its resistance to stress factors such as extreme variations in Temperature and Humidity.

In 2023 the Institute for Product Engineering of the University of Duisburg-Essen, Germany, started using our climatic chamber to test plastic samples aiming at improving their sustainability.

Mogatec laboratory makes use of an ACS T&RH test chamber based on Flower® patented technology, allowing to reduce energy consumption and minimize environmental impacts.

The new UK laboratory is dedicated to battery testing for ECE R100 homologation and UN DOT 38.3 compliance. There are few systems in Europe that can test battery packs as huge as this one.

The ACS transmittance test chamber supports Buildwise’s core activity of improving quality & reliability in the sector, where another key factor to be achieved today is sustainability.

The Laboratory of Engineering Sciences for the Environment is using our calorimeter for thermal transmittance tests to assess the performance of building envelopes in a controlled environment, both for construction and renovation of buildings.

Proud to have another big customer appreciating our efficiency, competence and technical know-how.

Since 2020, the ACS space simulator, called the MSVC (Medium Scale Vacuum Chamber), is part of the Italian Aerospace Research Center (C.I.R.A.) Space Propulsion Laboratory in Capua (CE).

To accelerate battery development for electric vehicles, ElringKlinger AG works with equipment from ACS to simulate environmental parameters.

ACS collaboration with Data Patterns dates back to 2007 when they first decided to use one of our chamber for Environmental Stress Screening tests.

Discovery My test chambers sustainability features and Easy Integration S/W Tools among the key factors influencing Johnson Electric choice for the right partner to deliver the best quality test results and products to their customers.

MATE, a company in the ART S.p.A. Group, is a test laboratory operating in the Automotive, Aerospace, Aviation & Defence, Biomedical, E-mobility, and Rail and Naval sectors. It has been using chambers supplied by Angelantoni Test Technologies for environmental and corrosion tests for over 10 years.

For this new test bench dedicated to thermal-vibrational fatigue and charge/discharge tests on automotive batteries, CSI has chosen a 18 mc walk-in ACS climatic chamber with a vibrating table interface.

With Flower® chamber, the institute carries out research for the development of technical fabrics, textile-based materials and semi-finished products

MERLO’s choice to work with ACS stems from the sharing of similar corporate values and vision: both groups were founded in Italy and make innovation and excellence their guiding values.

For environmental simulation, the Vorarlberg University of Applied Sciences relies on devices from Angelantoni Test Technologies, to perform accelerated lifetime testing and other reliability tests.

Bosch eBike Systems tests its Ebikes and Pedelecs through a roller dynamometer combined with an ACS thermostatic chamber.

Technologically advanced, accurate and reliable measurements, certified according to International Standards.

One of the largest Climatic Dyno Chambers installed in India, ACS emission test chamber is also equipped with solar light and wind simulation systems.

"A new CST1000/2T chamber has been introduced to perform thermal shock tests on electronic components and products for high tech industries, such as automotive, aerospace and industrial machinery."

"Fundamental in the development phases are the tests performed using climatic chambers associated with functional control and reliability devices."

From the UK to Spain, the best European universities make use of ACS experience for important test activities carried out in Belgium at ESA's Education Training Center.

After building one of the largest Thermal Vacuum Chambers in Europe last year, destined for the British Rutherford Appleton Laboratory, Angelantoni Test Technologies has scored a new record order.

"We have decided to confirm a partnership that has always guaranteed us highly reliable systems. "

TEC Eurolab laboratories work with companies to improve production processes and the quality of components.

One of the largest space simulators in the world, designed and built by ACS for Turkish Aerospace Industries (TAI).

Bees as bio-indicators to minimize particulate emissions and the impact of dust pollutants on the environment.

ACS is supplying TNO, the Netherlands Organisation for applied scientific research, with a Thermal Vacuum Chamber for the calibration of space or pseudo-space instruments at flight representative environmental conditions.

ACS supplied most of the climate test benches for the lithium-ion modules and high-voltage batteries for Voltavision.

ACS is a partner of WamBlee to perform the tests required by the most stringent Maritime and Aeronautical standards with precision and repeatability.

Yaroslavl Radio Plant, leader in Russia's radio manufacturing sector and specialized in communication equipment, has recently installed  two ACS Thermal Vacuum Chambers (TVC) for testing spacecraft payload modules in their Laboratories.

CAE, a leading Italian company in this sector, is using an ACS chamber for accelerated tests in order to guarantee measurement instruments with maximum robustness and reliability over time.

Dr. Ilaria Negri of the Catholic University of Piacenza illustrates the support of simulated environmental tests for studies on climate change and its consequences on biodiversity

ACS contributed to the innovative design of the Proventia Electric Vehicle Battery Test Laboratory, supplying the air handling system for their climatic chambers for battery testing.

Angelantoni Test Technologies is proud to have contributed to the mission of PRISMA, a satellite launched to study the Earth using spectroscopic techniques, entirely designed and built in Italy for the Italian Space Agency. 

Thanks to the considerable skills acquired in the field of vacuum technology, Angelantoni Test Technologies contributes to the ITER nuclear fusion project.