Subsidiaries:
Language:
Website:
Reserved area
product configurator
Transmittance test chambers and energy performance assessment

CHAMBERS FOR TRANSMITTANCE TESTS

Measuring the thermal behaviour of building components is crucial to comply with the increasingly stringent EU directives on energy performance.

ACS transmittance test chambers are used to measure the thermal behaviour of components, generally building components, in winter and summer under stationary and dynamic climatic conditions.

The focus here is on insulation, i.e. the thermal insulation of buildings. With this family of machines, it is possible to numerically quantify the ability of a structure to minimise heat transmission from the inside to the outside during winter and vice versa during summer. The higher the capacity of a building to thermally insulate, the lower the energy consumption of fuel or electricity.

It is therefore a highly relevant instrument with respect to environmental sustainability issues and is especially related to some recent directives of the European Council concerning the energy performance of buildings.

The Energy Performance of Building Directive (EPBD), approved on 12 April 2024 by the European Parliament is, together with the Energy Efficiency Directive, the main legislative instrument to promote the energy performance of buildings to help reduce greenhouse gas emissions and energy shortage in the EU. Buildings currently account for more than one third of greenhouse gas emissions in the EU.

In addition, a revision more widely known as the Green Directive came into force on 29 May 2024 to accelerate the energy efficiency of the existing assets and Member States will have until 29 May 2026 to comply. The Green Directive requires each EU member state to commit to the implementation of a new building refurbishment plan, taking measures to ensure a reduction in the average primary energy used by residential buildings.

ACS transmittance test chambers can give a fundamental contribution to the search for materials and solutions enabling the steps dictated by these new directives, by measuring real performance under reproducible environmental conditions in the laboratory.

As with calorimeters, transmittance test chambers consist of two different environments, one simulating the internal conditions of a house or building, the other reproducing all possible external climatic conditions. In between, a frame is fitted with dimensions of up to approximately 3x3m, which can be produced on request in several variants to accommodate different types of walls both in shape and thickness, so as to replicate different environmental conditions on the two faces, with a temperature difference of at least 20°C and air speed parallel to the surface, adjustable from a minimum of 0.1m/s up to 10m/s.

Transmittance test chambers are an essential tool for assessing the environmental sustainability of buildings: depending on the desired functionality, it is possible to test elements of a building (walls, glazing, doors, windows) in relation to a large number of external factors, such as temperature, humidity, wind, rain, solar radiation, and internal factors such as temperature, humidity, natural and forced air convection, vapour and air permeability. In special cases, through the application of specific solutions and instruments, it is possible to provide very low heat flux measurement on walls made of highly insulating materials with thermal transmittance in the range of 0.05 W/m2K.

Go to the product sheet.

Read on our website the case history dedicated to the special transmittance test chamber we realized for La Rochelle University in France.